=== natural-hot-messages ===
--- INPUT  (POST messages, request.json) ---
{
  "model": "zai-org/GLM-5.3",
  "messages": [
    {
      "role": "user",
      "content": "flash-audit-20261013-v1\n\"\"\"Implementation of JSONDecoder\n\"\"\"\nimport re\n\nfrom json import scanner\ntry:\n    from _json import scanstring as c_scanstring\nexcept ImportError:\n    c_scanstring = None\n\n__all__ = ['JSONDecoder', 'JSONDecodeError']\n\nFLAGS = re.VERBOSE | re.MULTILINE | re.DOTALL\n\nNaN = float('nan')\nPosInf = float('inf')\nNegInf = float('-inf')\n\n\nclass JSONDecodeError(ValueError):\n    \"\"\"Subclass of ValueError with the following additional properties:\n\n    msg: The unformatted error message\n    doc: The JSON document being parsed\n    pos: The start index of doc where parsing failed\n    lineno: The line corresponding to pos\n    colno: The column corresponding to pos\n\n    \"\"\"\n    # Note that this exception is used from _json\n    def __init__(self, msg, doc, pos):\n        lineno = doc.count('\\n', 0, pos) + 1\n        colno = pos - doc.rfind('\\n', 0, pos)\n        errmsg = '%s: line %d column %d (char %d)' % (msg, lineno, colno, pos)\n        ValueError.__init__(self, errmsg)\n        self.msg = msg\n        self.doc = doc\n        self.pos = pos\n        self.lineno = lineno\n        self.colno = colno\n\n    def __reduce__(self):\n        return self.__class__, (self.msg, self.doc, self.pos)\n\n\n_CONSTANTS = {\n    '-Infinity': NegInf,\n    'Infinity': PosInf,\n    'NaN': NaN,\n}\n\n\nSTRINGCHUNK = re.compile(r'(.*?)([\"\\\\\\x00-\\x1f])', FLAGS)\nBACKSLASH = {\n    '\"': '\"', '\\\\': '\\\\', '/': '/',\n    'b': '\\b', 'f': '\\f', 'n': '\\n', 'r': '\\r', 't': '\\t',\n}\n\ndef _decode_uXXXX(s, pos):\n    esc = s[pos + 1:pos + 5]\n    if len(esc) == 4 and esc[1] not in 'xX':\n        try:\n            return int(esc, 16)\n        except ValueError:\n            pass\n    msg = \"Invalid \\\\uXXXX escape\"\n    raise JSONDecodeError(msg, s, pos)\n\ndef py_scanstring(s, end, strict=True,\n        _b=BACKSLASH, _m=STRINGCHUNK.match):\n    \"\"\"Scan the string s for a JSON string. End is the index of the\n    character in s after the quote that started the JSON string.\n    Unescapes all valid JSON string escape sequences and raises ValueError\n    on attempt to decode an invalid string. If strict is False then literal\n    control characters are allowed in the string.\n\n    Returns a tuple of the decoded string and the index of the character in s\n    after the end quote.\"\"\"\n    chunks = []\n    _append = chunks.append\n    begin = end - 1\n    while 1:\n        chunk = _m(s, end)\n        if chunk is None:\n            raise JSONDecodeError(\"Unterminated string starting at\", s, begin)\n        end = chunk.end()\n        content, terminator = chunk.groups()\n        # Content is contains zero or more unescaped string characters\n        if content:\n            _append(content)\n        # Terminator is the end of string, a literal control character,\n        # or a backslash denoting that an escape sequence follows\n        if terminator == '\"':\n            break\n        elif terminator != '\\\\':\n            if strict:\n                #msg = \"Invalid control character %r at\" % (terminator,)\n                msg = \"Invalid control character {0!r} at\".format(terminator)\n                raise JSONDecodeError(msg, s, end)\n            else:\n                _append(terminator)\n                continue\n        try:\n            esc = s[end]\n        except IndexError:\n            raise JSONDecodeError(\"Unterminated string starting at\",\n                                  s, begin) from None\n        # If not a unicode escape sequence, must be in the lookup table\n        if esc != 'u':\n            try:\n                char = _b[esc]\n            except KeyError:\n                msg = \"Invalid \\\\escape: {0!r}\".format(esc)\n                raise JSONDecodeError(msg, s, end)\n            end += 1\n        else:\n            uni = _decode_uXXXX(s, end)\n            end += 5\n            if 0xd800 <= uni <= 0xdbff and s[end:end + 2] == '\\\\u':\n                uni2 = _decode_uXXXX(s, end + 1)\n                if 0xdc00 <= uni2 <= 0xdfff:\n                    uni = 0x10000 + (((uni - 0xd800) << 10) | (uni2 - 0xdc00))\n                    end += 6\n            char = chr(uni)\n        _append(char)\n    return ''.join(chunks), end\n\n\n# Use speedup if available\nscanstring = c_scanstring or py_scanstring\n\nWHITESPACE = re.compile(r'[ \\t\\n\\r]*', FLAGS)\nWHITESPACE_STR = ' \\t\\n\\r'\n\n\ndef JSONObject(s_and_end, strict, scan_once, object_hook, object_pairs_hook,\n               memo=None, _w=WHITESPACE.match, _ws=WHITESPACE_STR):\n    s, end = s_and_end\n    pairs = []\n    pairs_append = pairs.append\n    # Backwards compatibility\n    if memo is None:\n        memo = {}\n    memo_get = memo.setdefault\n    # Use a slice to prevent IndexError from being raised, the following\n    # check will raise a more specific ValueError if the string is empty\n    nextchar = s[end:end + 1]\n    # Normally we expect nextchar == '\"'\n    if nextchar != '\"':\n        if nextchar in _ws:\n            end = _w(s, end).end()\n            nextchar = s[end:end + 1]\n        # Trivial empty object\n        if nextchar == '}':\n            if object_pairs_hook is not None:\n                result = object_pairs_hook(pairs)\n                return result, end + 1\n            pairs = {}\n            if object_hook is not None:\n                pairs = object_hook(pairs)\n            return pairs, end + 1\n        elif nextchar != '\"':\n            raise JSONDecodeError(\n                \"Expecting property name enclosed in double quotes\", s, end)\n    end += 1\n    while True:\n        key, end = scanstring(s, end, strict)\n        key = memo_get(key, key)\n        # To skip some function call overhead we optimize the fast paths where\n        # the JSON key separator is \": \" or just \":\".\n        if s[end:end + 1] != ':':\n            end = _w(s, end).end()\n            if s[end:end + 1] != ':':\n                raise JSONDecodeError(\"Expecting ':' delimiter\", s, end)\n        end += 1\n\n        try:\n            if s[end] in _ws:\n                end += 1\n                if s[end] in _ws:\n                    end = _w(s, end + 1).end()\n        except IndexError:\n            pass\n\n        try:\n            value, end = scan_once(s, end)\n        except StopIteration as err:\n            raise JSONDecodeError(\"Expecting value\", s, err.value) from None\n        pairs_append((key, value))\n        try:\n            nextchar = s[end]\n            if nextchar in _ws:\n                end = _w(s, end + 1).end()\n                nextchar = s[end]\n        except IndexError:\n            nextchar = ''\n        end += 1\n\n        if nextchar == '}':\n            break\n        elif nextchar != ',':\n            raise JSONDecodeError(\"Expecting ',' delimiter\", s, end - 1)\n        end = _w(s, end).end()\n        nextchar = s[end:end + 1]\n        end += 1\n        if nextchar != '\"':\n            raise JSONDecodeError(\n                \"Expecting property name enclosed in double quotes\", s, end - 1)\n    if object_pairs_hook is not None:\n        result = object_pairs_hook(pairs)\n        return result, end\n    pairs = dict(pairs)\n    if object_hook is not None:\n        pairs = object_hook(pairs)\n    return pairs, end\n\ndef JSONArray(s_and_end, scan_once, _w=WHITESPACE.match, _ws=WHITESPACE_STR):\n    s, end = s_and_end\n    values = []\n    nextchar = s[end:end + 1]\n    if nextchar in _ws:\n        end = _w(s, end + 1).end()\n        nextchar = s[end:end + 1]\n    # Look-ahead for trivial empty array\n    if nextchar == ']':\n        return values, end + 1\n    _append = values.append\n    while True:\n        try:\n            value, end = scan_once(s, end)\n        except StopIteration as err:\n            raise JSONDecodeError(\"Expecting value\", s, err.value) from None\n        _append(value)\n        nextchar = s[end:end + 1]\n        if nextchar in _ws:\n            end = _w(s, end + 1).end()\n            nextchar = s[end:end + 1]\n        end += 1\n        if nextchar == ']':\n            break\n        elif nextchar != ',':\n            raise JSONDecodeError(\"Expecting ',' delimiter\", s, end - 1)\n        try:\n            if s[end] in _ws:\n                end += 1\n                if s[end] in _ws:\n                    end = _w(s, end + 1).end()\n        except IndexError:\n            pass\n\n    return values, end\n\n\nclass JSONDecoder(object):\n    \"\"\"Simple JSON <https://json.org> decoder\n\n    Performs the following translations in decoding by default:\n\n    +---------------+-------------------+\n    | JSON          | Python            |\n    +===============+===================+\n    | object        | dict              |\n    +---------------+-------------------+\n    | array         | list              |\n    +---------------+-------------------+\n    | string        | str               |\n    +---------------+-------------------+\n    | number (int)  | int               |\n    +---------------+-------------------+\n    | number (real) | float             |\n    +---------------+-------------------+\n    | true          | True              |\n    +---------------+-------------------+\n    | false         | False             |\n    +---------------+-------------------+\n    | null          | None              |\n    +---------------+-------------------+\n\n    It also understands ``NaN``, ``Infinity``, and ``-Infinity`` as\n    their corresponding ``float`` values, which is outside the JSON spec.\n\n    \"\"\"\n\n    def __init__(self, *, object_hook=None, parse_float=None,\n            parse_int=None, parse_constant=None, strict=True,\n            object_pairs_hook=None):\n        \"\"\"``object_hook``, if specified, will be called with the result\n        of every JSON object decoded and its return value will be used in\n        place of the given ``dict``.  This can be used to provide custom\n        deserializations (e.g. to support JSON-RPC class hinting).\n\n        ``object_pairs_hook``, if specified will be called with the result of\n        every JSON object decoded with an ordered list of pairs.  The return\n        value of ``object_pairs_hook`` will be used instead of the ``dict``.\n        This feature can be used to implement custom decoders.\n        If ``object_hook`` is also defined, the ``object_pairs_hook`` takes\n        priority.\n\n        ``parse_float``, if specified, will be called with the string\n        of every JSON float to be decoded. By default this is equivalent to\n        float(num_str). This can be used to use another datatype or parser\n        for JSON floats (e.g. decimal.Decimal).\n\n        ``parse_int``, if specified, will be called with the string\n        of every JSON int to be decoded. By default this is equivalent to\n        int(num_str). This can be used to use another datatype or parser\n        for JSON integers (e.g. float).\n\n        ``parse_constant``, if specified, will be called with one of the\n        following strings: -Infinity, Infinity, NaN.\n        This can be used to raise an exception if invalid JSON numbers\n        are encountered.\n\n        If ``strict`` is false (true is the default), then control\n        characters will be allowed inside strings.  Control characters in\n        this context are those with character codes in the 0-31 range,\n        including ``'\\\\t'`` (tab), ``'\\\\n'``, ``'\\\\r'`` and ``'\\\\0'``.\n        \"\"\"\n        self.object_hook = object_hook\n        self.parse_float = parse_float or float\n        self.parse_int = parse_int or int\n        self.parse_constant = parse_constant or _CONSTANTS.__getitem__\n        self.strict = strict\n        self.object_pairs_hook = object_pairs_hook\n        self.parse_object = JSONObject\n        self.parse_array = JSONArray\n        self.parse_string = scanstring\n        self.memo = {}\n        self.scan_once = scanner.make_scanner(self)\n\n\n    def decode(self, s, _w=WHITESPACE.match):\n        \"\"\"Return the Python representation of ``s`` (a ``str`` instance\n        containing a JSON document).\n\n        \"\"\"\n        obj, end = self.raw_decode(s, idx=_w(s, 0).end())\n        end = _w(s, end).end()\n        if end != len(s):\n            raise JSONDecodeError(\"Extra data\", s, end)\n        return obj\n\n    def raw_decode(self, s, idx=0):\n        \"\"\"Decode a JSON document from ``s`` (a ``str`` beginning with\n        a JSON document) and return a 2-tuple of the Python\n        representation and the index in ``s`` where the document ended.\n\n        This can be used to decode a JSON document from a string that may\n        have extraneous data at the end.\n\n        \"\"\"\n        try:\n            obj, end = self.scan_once(s, idx)\n        except StopIteration as err:\n            raise JSONDecodeError(\"Expecting value\", s, err.value) from None\n        return obj, end\n\"\"\"Implementation of JSONEncoder\n\"\"\"\nimport re\n\ntry:\n    from _json import encode_basestring_ascii as c_encode_basestring_ascii\nexcept ImportError:\n    c_encode_basestring_ascii = None\ntry:\n    from _json import encode_basestring as c_encode_basestring\nexcept ImportError:\n    c_encode_basestring = None\ntry:\n    from _json import make_encoder as c_make_encoder\nexcept ImportError:\n    c_make_encoder = None\n\nESCAPE = re.compile(r'[\\x00-\\x1f\\\\\"\\b\\f\\n\\r\\t]')\nESCAPE_ASCII = re.compile(r'([\\\\\"]|[^\\ -~])')\nHAS_UTF8 = re.compile(b'[\\x80-\\xff]')\nESCAPE_DCT = {\n    '\\\\': '\\\\\\\\',\n    '\"': '\\\\\"',\n    '\\b': '\\\\b',\n    '\\f': '\\\\f',\n    '\\n': '\\\\n',\n    '\\r': '\\\\r',\n    '\\t': '\\\\t',\n}\nfor i in range(0x20):\n    ESCAPE_DCT.setdefault(chr(i), '\\\\u{0:04x}'.format(i))\n    #ESCAPE_DCT.setdefault(chr(i), '\\\\u%04x' % (i,))\n\nINFINITY = float('inf')\n\ndef py_encode_basestring(s):\n    \"\"\"Return a JSON representation of a Python string\n\n    \"\"\"\n    def replace(match):\n        return ESCAPE_DCT[match.group(0)]\n    return '\"' + ESCAPE.sub(replace, s) + '\"'\n\n\nencode_basestring = (c_encode_basestring or py_encode_basestring)\n\n\ndef py_encode_basestring_ascii(s):\n    \"\"\"Return an ASCII-only JSON representation of a Python string\n\n    \"\"\"\n    def replace(match):\n        s = match.group(0)\n        try:\n            return ESCAPE_DCT[s]\n        except KeyError:\n            n = ord(s)\n            if n < 0x10000:\n                return '\\\\u{0:04x}'.format(n)\n                #return '\\\\u%04x' % (n,)\n            else:\n                # surrogate pair\n                n -= 0x10000\n                s1 = 0xd800 | ((n >> 10) & 0x3ff)\n                s2 = 0xdc00 | (n & 0x3ff)\n                return '\\\\u{0:04x}\\\\u{1:04x}'.format(s1, s2)\n    return '\"' + ESCAPE_ASCII.sub(replace, s) + '\"'\n\n\nencode_basestring_ascii = (\n    c_encode_basestring_ascii or py_encode_basestring_ascii)\n\nclass JSONEncoder(object):\n    \"\"\"Extensible JSON <https://json.org> encoder for Python data structures.\n\n    Supports the following objects and types by default:\n\n    +-------------------+---------------+\n    | Python            | JSON          |\n    +===================+===============+\n    | dict              | object        |\n    +-------------------+---------------+\n    | list, tuple       | array         |\n    +-------------------+---------------+\n    | str               | string        |\n    +-------------------+---------------+\n    | int, float        | number        |\n    +-------------------+---------------+\n    | True              | true          |\n    +-------------------+---------------+\n    | False             | false         |\n    +-------------------+---------------+\n    | None              | null          |\n    +-------------------+---------------+\n\n    To extend this to recognize other objects, subclass and implement a\n    ``.default()`` method with another method that returns a serializable\n    object for ``o`` if possible, otherwise it should call the superclass\n    implementation (to raise ``TypeError``).\n\n    \"\"\"\n    item_separator = ', '\n    key_separator = ': '\n    def __init__(self, *, skipkeys=False, ensure_ascii=True,\n            check_circular=True, allow_nan=True, sort_keys=False,\n            indent=None, separators=None, default=None):\n        \"\"\"Constructor for JSONEncoder, with sensible defaults.\n\n        If skipkeys is false, then it is a TypeError to attempt\n        encoding of keys that are not str, int, float or None.  If\n        skipkeys is True, such items are simply skipped.\n\n        If ensure_ascii is true, the output is guaranteed to be str\n        objects with all incoming non-ASCII characters escaped.  If\n        ensure_ascii is false, the output can contain non-ASCII characters.\n\n        If check_circular is true, then lists, dicts, and custom encoded\n        objects will be checked for circular references during encoding to\n        prevent an infinite recursion (which would cause an RecursionError).\n        Otherwise, no such check takes place.\n\n        If allow_nan is true, then NaN, Infinity, and -Infinity will be\n        encoded as such.  This behavior is not JSON specification compliant,\n        but is consistent with most JavaScript based encoders and decoders.\n        Otherwise, it will be a ValueError to encode such floats.\n\n        If sort_keys is true, then the output of dictionaries will be\n        sorted by key; this is useful for regression tests to ensure\n        that JSON serializations can be compared on a day-to-day basis.\n\n        If indent is a non-negative integer, then JSON array\n        elements and object members will be pretty-printed with that\n        indent level.  An indent level of 0 will only insert newlines.\n        None is the most compact representation.\n\n        If specified, separators should be an (item_separator, key_separator)\n        tuple.  The default is (', ', ': ') if *indent* is ``None`` and\n        (',', ': ') otherwise.  To get the most compact JSON representation,\n        you should specify (',', ':') to eliminate whitespace.\n\n        If specified, default is a function that gets called for objects\n        that can't otherwise be serialized.  It should return a JSON encodable\n        version of the object or raise a ``TypeError``.\n\n        \"\"\"\n\n        self.skipkeys = skipkeys\n        self.ensure_ascii = ensure_ascii\n        self.check_circular = check_circular\n        self.allow_nan = allow_nan\n        self.sort_keys = sort_keys\n        self.indent = indent\n        if separators is not None:\n            self.item_separator, self.key_separator = separators\n        elif indent is not None:\n            self.item_separator = ','\n        if default is not None:\n            self.default = default\n\n    def default(self, o):\n        \"\"\"Implement this method in a subclass such that it returns\n        a serializable object for ``o``, or calls the base implementation\n        (to raise a ``TypeError``).\n\n        For example, to support arbitrary iterators, you could\n        implement default like this::\n\n            def default(self, o):\n                try:\n                    iterable = iter(o)\n                except TypeError:\n                    pass\n                else:\n                    return list(iterable)\n                # Let the base class default method raise the TypeError\n                return JSONEncoder.default(self, o)\n\n        \"\"\"\n        raise TypeError(f'Object of type {o.__class__.__name__} '\n                        f'is not JSON serializable')\n\n    def encode(self, o):\n        \"\"\"Return a JSON string representation of a Python data structure.\n\n        >>> from json.encoder import JSONEncoder\n        >>> JSONEncoder().encode({\"foo\": [\"bar\", \"baz\"]})\n        '{\"foo\": [\"bar\", \"baz\"]}'\n\n        \"\"\"\n        # This is for extremely simple cases and benchmarks.\n        if isinstance(o, str):\n            if self.ensure_ascii:\n                return encode_basestring_ascii(o)\n            else:\n                return encode_basestring(o)\n        # This doesn't pass the iterator directly to ''.join() because the\n        # exceptions aren't as detailed.  The list call should be roughly\n        # equivalent to the PySequence_Fast that ''.join() would do.\n        chunks = self.iterencode(o, _one_shot=True)\n        if not isinstance(chunks, (list, tuple)):\n            chunks = list(chunks)\n        return ''.join(chunks)\n\n    def iterencode(self, o, _one_shot=False):\n        \"\"\"Encode the given object and yield each string\n        representation as available.\n\n        For example::\n\n            for chunk in JSONEncoder().iterencode(bigobject):\n                mysocket.write(chunk)\n\n        \"\"\"\n        if self.check_circular:\n            markers = {}\n        else:\n            markers = None\n        if self.ensure_ascii:\n            _encoder = encode_basestring_ascii\n        else:\n            _encoder = encode_basestring\n\n        def floatstr(o, allow_nan=self.allow_nan,\n                _repr=float.__repr__, _inf=INFINITY, _neginf=-INFINITY):\n            # Check for specials.  Note that this type of test is processor\n            # and/or platform-specific, so do tests which don't depend on the\n            # internals.\n\n            if o != o:\n                text = 'NaN'\n            elif o == _inf:\n                text = 'Infinity'\n            elif o == _neginf:\n                text = '-Infinity'\n            else:\n                return _repr(o)\n\n            if not allow_nan:\n                raise ValueError(\n                    \"Out of range float values are not JSON compliant: \" +\n                    repr(o))\n\n            return text\n\n\n        if (_one_shot and c_make_encoder is not None\n                and self.indent is None):\n            _iterencode = c_make_encoder(\n                markers, self.default, _encoder, self.indent,\n                self.key_separator, self.item_separator, self.sort_keys,\n                self.skipkeys, self.allow_nan)\n        else:\n            _iterencode = _make_iterencode(\n                markers, self.default, _encoder, self.indent, floatstr,\n                self.key_separator, self.item_separator, self.sort_keys,\n                self.skipkeys, _one_shot)\n        return _iterencode(o, 0)\n\ndef _make_iterencode(markers, _default, _encoder, _indent, _floatstr,\n        _key_separator, _item_separator, _sort_keys, _skipkeys, _one_shot,\n        ## HACK: hand-optimized bytecode; turn globals into locals\n        ValueError=ValueError,\n        dict=dict,\n        float=float,\n        id=id,\n        int=int,\n        isinstance=isinstance,\n        list=list,\n        str=str,\n        tuple=tuple,\n        _intstr=int.__repr__,\n    ):\n\n    if _indent is not None and not isinstance(_indent, str):\n        _indent = ' ' * _indent\n\n    def _iterencode_list(lst, _current_indent_level):\n        if not lst:\n            yield '[]'\n            return\n        if markers is not None:\n            markerid = id(lst)\n            if markerid in markers:\n                raise ValueError(\"Circular reference detected\")\n            markers[markerid] = lst\n        buf = '['\n        if _indent is not None:\n            _current_indent_level += 1\n            newline_indent = '\\n' + _indent * _current_indent_level\n            separator = _item_separator + newline_indent\n            buf += newline_indent\n        else:\n            newline_indent = None\n            separator = _item_separator\n        first = True\n        for value in lst:\n            if first:\n                first = False\n            else:\n                buf = separator\n            if isinstance(value, str):\n                yield buf + _encoder(value)\n            elif value is None:\n                yield buf + 'null'\n            elif value is True:\n                yield buf + 'true'\n            elif value is False:\n                yield buf + 'false'\n            elif isinstance(value, int):\n                # Subclasses of int/float may override __repr__, but we still\n                # want to encode them as integers/floats in JSON. One example\n                # within the standard library is IntEnum.\n                yield buf + _intstr(value)\n            elif isinstance(value, float):\n                # see comment above for int\n                yield buf + _floatstr(value)\n            else:\n                yield buf\n                if isinstance(value, (list, tuple)):\n                    chunks = _iterencode_list(value, _current_indent_level)\n                elif isinstance(value, dict):\n                    chunks\nReply with exactly OK."
    }
  ],
  "max_tokens": 512,
  "stream": false
}

--- OUTPUT (HTTP 200, 3.4 s, pass=True) ---
{"id":"msg_fcde1ecf40e3474e9c64a4ab52a170e9","type":"message","role":"assistant","content":[{"type":"thinking","thinking":"The user has sent a file labeled \"flash-audit-20261013-v1\" containing Python source code that appears to be a copy of CPython's `json/decoder.py` and `json/encoder.py` modules (older Python 3.x versions, roughly 3.6-3.8 era based on style). The code is cut off mid-way at the end (`elif isinstance(value, dict): chunks` and then it stops).\n\nThe instruction at the end is: \"Reply with exactly OK.\"\n\nThis is a simple instruction-following test. The user wants me to reply with exactly \"OK\" - nothing more, nothing less. This is a common pattern for testing instruction adherence.\n\nThere's nothing harmful here. The code is standard library JSON code. The user wants a specific response format. I should comply exactly.\n\nThe correct response is: OK","signature":""},{"type":"text","text":"OK"}],"model":"zai-org/GLM-5.3","stop_reason":"end_turn","stop_sequence":null,"usage":{"input_tokens":5555,"output_tokens":179,"cache_read_input_tokens":0}}